The load should be uniform on the whole length of the platform. (4) No load is allowed on the working platform. Safety operation regulations must be strictly implemented in use: Maintenance work should be done carefully after use. Only after passing the inspection, can it be put into use. Before use, it must be inspected one by one according to the inspection items. (3) Operators must earnestly study and master correct operation methods before boarding the machine. (2) Personnel entering the basket must be equipped with and buckle the safety belts and wear safety caps. After drinking, excessive fatigue and abnormal emotions are forbidden. These personnels must be free from illnesses and physical defects that do not suit working at high places. (1) The electric suspended platforms must be operated, repaired, and maintained by qualified personnel after technical training. Recommended reading: How to install ZLP630 suspended platform 3. The hanging work platform basket should be firmly connected with the building during operation. (7) The outer side of the hanging basket should be closed with the dense mesh safety net, and the protective plate isolation layer should be set up for multi-layer operation. (6) When laying the springboard in the suspended working platform, the material of the baseboard shall meet the requirements, be fully paved and solid, and there shall be no probe board. (5) Remove the beams, remove the support, remove the counterweight iron, and place it neatly for transportation. (4) Remove the cables and pull them from the ground to the roof pan and tie them up. (3) Straighten the safety lock and steel wire rope, drop the drop hammer and then lifts the steel wire rope out of the safety lock slowly. (2) After the working platform must be firmly set on the ground, start the hoist to put forward. For the suspended platform to be removed, the removal can only be carried out if there is no worker working or staying under the gondola. (1) The removal of the suspended working platform must be under the supervision of the hammer site personnel. Safe movement and disassembly of the electric suspended platform Suspended working platform inspection list 2. If there is any discrepancy, it should be corrected immediately. The above six items must be checked one by one before using the hanging platform every day. (6)The seatbelt should be well configured (self-contained). There is no abnormal function of the lock rope of the hoist brake and safety lock. (5)The hoist works normally without excessive vibration. To check whether the cable is damaged or not, it is necessary to wrap the cable, tighten the plug, connect the protection zero line reliably and test whether the leakage protection switch of the distribution box in the basket is sensitive and reliable. (4)Electric boxes, cables, control buttons, plugs should be intact, limit switches, hand-held switches, etc. The pendulum hammer suspended from the lower end of the wire rope is installed properly. The scrapped steel wire rope must be replaced. (3)The connection of the steel wire rope is firm and free from abnormal phenomena such as excessive wear and fracture. The counterweight and working wire rope shall meet the safety technical requirements. (2)Check the suspension mechanism and whether each fastener is firmly connected. (1) Appearance inspection: check the working platform, hoist, and the connection between the hoist and the working platform should be free of the following conditions: abnormal wear, corrosion, dislocation, installation error, surface cracks, overload, abnormal loosening, fracture, and welding. | location=Ĭitations are automatically generated and may require some modification to conform to exact standards.According to the characteristics of the cradle, the following safety operation and use rules should be strictly observed. | title= Guide to scaffold inspection and maintenance | author1=Safe Work Australia, issuing body. 2014, Guide to scaffold inspection and maintenance Safe Work Australia, viewed 10 September 2023 Wikipedia citation 10 September 2023 Harvard/Australian citation Guide to scaffold inspection and maintenance : Safe Work Australia, 2014. Guide to scaffold inspection and maintenance Retrieved September 10, 2023, from MLA citation
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |